-
Cured epoxy exhibits excellent thermal stability and thermal cycling performance. A two component, heat cured epoxy system, developed specifically for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1337 / CLH 5515
-
130°C Operating. Low Exotherm, low shrinkage, excellent shock resistance. A two component epoxy which is recommended for potting and casting transformers, coils and other electronic components. The system provides a good pot life with low exotherm and shrinkage. Cured material has excellent thermal shock resistance. CLR 1376 / CLH 6930
-
Low viscosity epoxy, Suitable for machine dispense, Pot / Cast electronic switches. A low viscosity, general purpose, room temperature curing, epoxy encapsulant. Product is filled with non-abrasive fillers suitable for machine dispensing. Product has good physical, thermal and electrical properties. CLR 1476 / CLH 6730
-
Room Temperature Cure, filled epoxy system suitable for machine dispense. Developed for potting and casting of electrical and electronic components. The cured material exhibits excellent thermal cycling endurance. CLR 1556 / CLH 6640
-
Excellent heat dissipation, 125°C Operating. A thermally conductive two part epoxy system. The system was specifically designed for applications where heat dissipation on thermally sensitive devices is required. CLR 1566 / CLH 6020
-
Long pot life, Excellent heat dissipation. A thermally conductive two part epoxy system. The system was specifically designed for applications where heat dissipation on thermally sensitive devices is required. CLR 1566 / CLH 6025
-
UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580
-
Product is machine dispense friendly. A filled, high temperature operating, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive fillers and convenient mix ratio makes it suitable for processing in automatic dispense equipment. As part of an insulating system, it will meet class H, electrical temperature. This product meets UL94-V1 in house flammability testing. CLR 1820 / CLH 6440
-
UL 94-V1 Epoxy system for casting and potting electrical and electronic components, as part of an electrical insulating system it will meet Class H electrical temperature classification. A filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. CLR 1821 / CLH 6441
-
1:1 Mix Ratio, Fast Gel, Medium viscosity, Flameout, 180°C operating, Ballast potting. A filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio make it suitable for processing in automatic dispense equipment. This product meets UL94-V1 in house flammability testing. CLR 1826 / CLH 6445
-
Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. A heat cure, low stress, extremely tough, epoxy casting compound. Product was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1831 / CLH 5185
-
Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1836 / CLH 5185
-
Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1837 / CLH 5185
-
Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1876 / CLH 6631
-
Heat Cure, UV resistant, outdoor, low-stress, large mass casting epoxy system for instrument and power transformers. Extremely tough, epoxy compound. this system was specifically developed for use on outdoor instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 2161 / CLH 5100
-
A semi-flexible, 100% solid, epoxy system. This product was specifically developed for potting / casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. Product passes UL94-HB in-house flammability testing. For a more rigid system, CLR 3517 / CLH 6230 is recommended. CLR 3507 / CLH 6230
-
Room temperature cure, filled, semi-flexible epoxy system. Long pot life material is suitable for large mass casting or heat-induced curing with minimal stress. This product was specifically developed for potting / casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. For a softer system, CLR 3506 / CLH 6230 is recommended. CLR 3516 / CLH 6230
-
High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600
-
A low viscosity, single component, epoxy potting and encapsulating compound. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL 94-HB flammability requirements. Heat Cure Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. CLS 9611
-
Heat Cure. Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. Low viscosity. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL94-HB flammability requirements. CLS 9616